Plumbing Diagrams (SunPower)

Plumbing diagrams are provided in this section as a planning guide to the sequence of equipment, valves, and fittings.

  • The basic plumbing configurations for typical installations are shown.
  • If the installation does not closely follow any of the supplied plumbing diagrams, AquaCal® Technical Support is available for installation advice and guidance.
  • Confirm water provided to the heat pump is clean and filtered.

Typical SunPower Installation

Dedicated Spa Heater using Pool as the Heat Source.

Please note -

The SunPower is designed to provide heating for a spa. Not a pool.

SunPower Heat Pump Configuration