PoolSync®
Select heat pumps (with an HP9 control board installed) will automatically allow for WI-FI capabilities using a PoolSync®.
- The PoolSync® device will allow direct control of the heat pump from a mobile device.
- Contact installing dealer to order this product.
- Go online and download the PoolSync® manual for information on connecting and using this device with an AquaCal heat pump. https://www.aquacal.com/owners-manuals/
- Confirm the PoolSync® has been set as an active external control device. See "Confirm PoolSync® is set to operate".
The heat pump has this device active by default. In this example, however, the heat pump is reconfigured to use the PoolSync® device instead of a prior configuration of a "SMART" external controller.
IF UNIT IS ASLEEP,
SWIPE TO WAKE UP
A
PRESS MENU
BUTTON
B
USE ARROWS TO
"SYSTEM"
C
PRESS "ENTER"
D
USE ARROWS TO
"ADVANCED"
E
PRESS "ENTER"
1
USE ARROWS TO
"EXTERNAL CONTROL"
2
ENTER TO SELECT
3
ARROWS TO MODE
4
ENTER TO EDIT
5
ARROWS TO
"POOLSYNC"
6
ENTER TO SELECT
MENU TO EXIT, PRESS & HOLD TO STATUS
MENU TO EXIT, PRESS
& HOLD TO STATUS
