Application

Software instructions for Installer:

1. Download Application and Install on Mobile Device.
2. Open the PoolSync® application.
3. Create a new account, or log into an existing account.
4. Press the "SERVICE ACCESS" button on the PoolSync®.
5. On the mobile device, enable Bluetooth and WI-FI.
6. Select the PoolSync® WI-FI network and enter the password: "poolconnect" when prompted.
7. The Systems Page will be displayed with connected equipment showing.
8. Make sure all devices are listed in application. If needed, select the three vertical dots to the right of PoolSync® and select "DISCOVER EQUIPMENT"and select "OK'.
9. Select each piece of equipment and test operation by changing settings.
10. Press the "SERVICE ACCESS" button to disconnect.

Software instructions for Home Owner / End User:

1. Download Application and Install on Mobile Device.
2. Open the PoolSync® application.
3. Create a new account, or log in to an existing account.
4. Press the "SETUP" button on PoolSync®.
5. On the mobile device, enable Bluetooth and WI-FI.
6. Select the (gear) icon to open the application settings page.
7. Select "ADD NEW POOLSYNC"
8. Select the PoolSync® device.
9. Click "JOIN" when prompted.
10. Select the desired WI-FI network from the list.
11. Enter the password and tap "CONNECT".
12. You may confirm the entry by tapping the (eye) icon in the text field.
13. If you want the equipment to be accessible through the internet, click "YES". Otherwise, click "NO".
14. The systems page will be displayed with connected equipment shown. If needed, select the three vertical dots to the right of PoolSync® and select "DISCOVER EQUIPMENT" and select "OK'.