Display Panel

The following information outlines the operation for a standard installation.

Control Buttons will operate differently for custom installations; such as:

  • When a heat pump is connected to an external controller or multiple heat pump configuration.

  • When a site configuration preset has been used.

 

 

ClosedButtons

Button Description

Slowly slide a finger across the buttons from left to right to disable the sleep mode.

Sleep mode will automatically reactivate after three minutes have passed.

Select either the POOL or SPA mode. Any connected valves or circulation pumps will activate. To deactivate, press the "Pool/Spa" button again.

If an option is highlighted, it will automatically activate after 10 seconds.
Enter the user menus for heat pump options. Also used to exit from a menu. Press and hold the MENU button to exit to the main status screen.
Used to increase temperature setpoint and navigate through menu options.
Used to decrease temperature setpoint and navigate through menu options.
Used to select the heat pump's operating mode. Also used to edit or confirm options in a menu.

ClosedIndicator Lights

ClosedDisplays