Document LTM0930 rev 1.02

 

 

Setting Heat Mode

Deactivating Equipment

Activate Heat Mode, Cool Mode, Auto Mode, or Deactivate Equipment

Press "Mode / Enter" button until desired mode is displayed.

  • HEATING MODE- After fan and compressor starts, the red "Heating" light will activate.
  • COOLING MODE - After fan and compressor starts, the blue "Cooling" light will activate.
  • AUTO MODE - After fan and compressor starts, the heat pump will maintain the set temperature within 1°. The red "Heating" or blue "Cooling" light will activate.
  • OFF - The heat pump will indicate it is deactivated. The current water temperature will be displayed.